Perusahaan ini terdaftar sebagai Free Member. Hindari melakukan pembayaran sebelum bertemu penjual atau melihat barang secara langsung. COD (Cash On Delivery) atau bertemu langsung dengan penjual merupakan metode transaksi aman yang kami sarankan.
The Shimpo DT-311J-230V heavy duty digital stroboscope has a xenon flash tube, a 200 to 1,500 flashes per minute (FPM) flash range, and is Ingress Protection 65 (IP65) rated for use in harsh conditions. It is designed for motion analysis, preventive maintenance, and speed measurement of repetitive motion in harsh or wet environments including textile, weaving, and printing industries.
The stroboscope is used to set injection timing, injection pressure, timing of shedding and weft running time of weaving machinery. The xenon flash tube provides crisp images in brightly lit areas. Xenon flash tubes have brighter light output and a shorter flash duration than LED lights. Bright light output is required for quality images in brightly lit areas, and shorter flash durations provide sharper images, especially at high rates of speed.
Internal and external trigger modes have a 200 to 1,500 FPM range and an accuracy of + or - 1 digit. An alarm indicates an out-of-range speed below 200 or above 1,500rpm. External mode features include automatic synchronization, phase shift, tachometer mode (rpm), and divide ratio selection. Divide ratios of 1/1, 1/2, 1/3, 1/4, and 2/4 enable the operator to distinguish true RPM from harmonics. Phase shift has a range of 0 to 359 degrees in one-degree increments to enable the operator to adjust the focal point of the object to any point in the rotation without moving the trigger point.
The National Electrical Manufacturers Association (NEMA) 4X housing is IP65 rated against airborne particles, water, and corrosive agents. Shock-absorbing components provide protection in harsh environments. The stroboscope is 230V AC line powered and includes a 6m/19.68ft input and power cable with a connector, a rubber strobe guard with handle, and instructions. Stroboscopes are used in a variety of settings including manufacturing, printing, education, and photography..
Features:
Digital stroboscope with Ingress Protection 65 (IP65) rating is designed for motion analysis, preventive maintenance, and speed measurement of repetitive motion in harsh or wet environments including textile, weaving, and printing industries
Internal and external trigger with a flash-rate range of 200-1,500 FPM (flashes per minute) and built-in divide ratio of 1/1, 1/2, 1/3, 1/4, and 2/4 with shift
Xenon flash tube provides crisp images in brightly lit areas
Phase shift of 0 to 359 degrees (one-degree increments) is rotary-dial controlled
230V AC power requirement with 19.68ft/6m input/power cable and connector
What's in the Box:
(1) Shimpo DT-311J-230 stroboscope
(1) 19.68ft/6m input and power cable with connector
(1) Rubber strobe guard with handle
(1) Instructions
